SpYne 130/130 LV/130 HV
High Performance, Hard-Charging
Updated for 2014/15, the SpYne 130 is K2’s flagship all-mountain performance powerhouse ski boot, fueled by the E3 Philosophy (Energy Efficient Engineering). Headquartered at the rivet-less Energy Interlock, the SpYne 130 absorbs external energy and transfers power through the support of the PowerFuse SpYne, molded and lasted PrecisionFit INTUITION® liners, and the PowerCinch Strap. The result is the highest performing ski boot in the collection with a true 130 flex for all-mountain skiers. Offered in a 97mm(LV), 100mm, or new 102mm(HV) last.
- Sizes: 24.5, 25.5, 26.5, 27.5, 28.5, 29.5, 30.5
- Model Options: 130 hv, 130, 130 lv
- Features: Energy Interlock, Powerfuse Spyne, Dual Cuff Alignment, Replaceable Outsoles, Padded Mid-Grip, 40mm PowerClinch Strap
A rear co-injected “Y” shaped design that adds strength and power to the Energy Interlock, the PowerFuse SpYne maximizes fore/aft flex efficiency and lateral stiffness for sustained performance and responsiveness in all terrain. Because of the SpYne, we are able to optimize materials in the cuff and shell, eliminating excessive vibrations in rough terrain.
A rivet-free technology that locks the cuff and shell in both the forward and aft direction. This fundamental technology gives the boots life and power ideal for all-mountain and freeride skiing where you encounter a wide variety of conditions and terrain. When the boot flexes forward, the Interlock stretches, creating a buildup of energy. This not only puts lower stresses on the boot material but also produces a smoother, more efficient load transfer, delivering a more natural flex and dynamic performance in all conditions.
Dual-injected Thermo Plastic Rubber (TPR) with Thermo Plastic Urethane (TPU) increases the life of your boots and provides secure footing whether walking on rock, ice, or stairs.
Duel Injected Thermo Plastic Rubber (TPR) for added grip and traction while walking on rocks or riding on snowmobiles.
Our premium, heat-moldable liner, the PrecisionFit INTUITION®, is molded/lasted to deliver a precise “out-of-the-box” fit, minimize “dead spots,” and optimize power transfer between the liner and shell. Heat-Moldable Asymmetric Tongues provide the necessary comfort and performance needed to reduce shin bang and ensure smooth, precise flex initiation. The Power Wedge and Power Collar offer varied forward lean and the upper cuff support you demand for charging hard.
Dual Cuff Alignment
Adjust +/- 2.2 degrees on medial and lateral sides for a total range of 4.4 degrees. This enables adjustment to the lower leg angle for maximum comfort and performance.